If you decide to install the laminate flooring in your home, you must be prepared to keep your mind open to the many options there. From styles and types to sizes or installation procedures, the presence of layers of leaves in your home or office can make a significant difference in how the area feels, sounds and shape in general. As a full floor material, laminate flooring may be the best choice for many homeowners or businesses.

The major thing to remember is all laminate flooring manufacturers have their installation procedures. It may seem that all are similar, but there are small differences in some aspects of fixation, such as glue. If you don’t follow the provided instructions by the manufacturer when purchasing, any mistake you make may void the product warranty. Although each manufacturer may have different procedures, there are some things in common.

Laminate Flooring Installation

The first thing you will need is a basement level to place the panels. The floor should be level and flat, without spaces greater than 3 inches. You must deactivate the high paints and fill in the low points so that the floor is flat. You must take into account the free space in inches at the edge of the entire installation. If the floor is too close to the wall or touches it, the floor is likely to fail.

It will take two or three days for laminate floor to adapt to the surrounding. You must allow the laminate flooring to adapt to the new environmental conditions before you start the installation process.

When you begin, do not use any material that appears to have been damaged. If you do this, your warranty cannot be applied. Be sure to check the large laminate floor for defects or flaws.

Checklist Before Installing

Before installing the laminate floor, you must follow several steps to ensure that your installation is completed effectively.

  1. Be sure to remove all “fragile elements” where the floors will fit
  2. If necessary, dispose of all furniture and subfloors. When you want to change the height of the floors, make the necessary adjustments to your doors until you open them and close them correctly.
  3. Check your items in cabinets and other storage areas and remove everything you can clog with the installation of your laminate floor.
  4. The temperature of your home should be adequate for the adjustment of the plate.

5 Main Steps to Follow When Installing Laminate Flooring

Step 1 : A Good Organization is Key to Success

First, you should think what you want to achieve. Then plan everything before you begin. Get all the necessary tools and accessories at your fingertips: sufficient floors, proper lining, transitions, molds, all the tools and glue before you begin. Use all training resources available online and free, including training pages for manufacturers, tube, blag, etc. Always ensure you have a basic knowledge of the scope of the project and the expectations of completion time before you begin.

Step 2: Check Laminate Panels Before Installation

High-Pressure Laminate Panels

Check the floor before installation to make sure it has the correct style and color. Inspect all laminate panels for apparent defects. Pay special attention to the leaves that were in the box with visible damage to the box. Do not install damaged laminate panels! Note: The labor guarantee does not cover or replace claims for materials with obvious defects. If you encounter a problem after opening 3 boxes of sheets, do not continue with the installation process and contact your material supplier for help.

Step 3: The Basics Are Very Important

  1. Check the Subfloor Before Installation: Make sure the subpart is in good condition before installation! Screw or screw loose spaces that creak and replace damaged areas that are loose or damaged by moisture. Clean all debris and loose dirt before placing the bottom layer of foam.
  2. Acclimation: Keep the temperature of at least 65 AF 48 hours before and after installation.
  3. Use Appropriate Underlayment: Laminate floors laminated correctly should have a sound below them installed beneath them. Use the regular bottom layer when installing your slides on the laminate floor. You should use the underlayment for the following: cement sub-floor, ceramic tiles based on an underground layer of cement, laminate floors over moving areas, in manufactured houses, vinyl installed in a radioactive concrete floor.

Step 4: Expansion Gaps Are of Great Importance

Expansion Gaps In Laminate Flooring

The laminate floor is designed to be installed as a “floating floor”; therefore, it does not stick or stick to the basement and acts as one of the large “pancakes” that expand and contract with temperature/humidity changes. Be sure to lease the “expansion gap around the perimeter of the room at least, and around any stationary tool, such as pipes, columns and building deposits, if this condition is not met, a fall in the floor can occur.

Do not forget to leave the expansion gap when you install your templates too. Never install the base of the wall or the square moldings on the laminate floors, install them on the wall and not on your floor.

Step 5: Take Time to Make The Final Touch!

touch laminate floors

The curves of the doors drip and plan how to finish the areas around the pipes, posts or columns for a polished look. Do not use prey to hide your mistakes. Take your time to do it correctly! Use the templates to move the color coordinate to give a beautiful final appearance.

Additional Advice: Do not cut your page in the room where you are installing laminate floors. When small particles of laminate dust stick to the laminate flooring system, you may have trouble strengthening the laminate panels together. If you have any reason, at any stage of the installation you have doubts about your ability to complete it, employ a professional laminate flooring installer listed on the insured list and can make at least one recommendation. Do not hesitate to contact your customers to verify the quality of their work.

laminate vinyl floor


If you install your laminate vinyl floor, you will save a lot of money. It doesn’t require to be a difficult process if you are familiar with the instructions and have all the flooring tools you will require at hand. You can find additional information on the web, or you can ask a friend to help you. You will be proud to step back and see the beauty of your crafts.

5 Steps to Follow When Installing Laminate Flooring
Article Name
5 Steps to Follow When Installing Laminate Flooring
Step 1 : A Good Organization is Key to Success; Step 2: Check Laminate Panels Before Installation; Step 3: The Basics Are Very Important; Step 4: Expansion Gaps Are of Great Importance; Step 5: Take Time to Make The Final Touch!
Publisher Name
Publisher Logo